Analisis Postur Tubuh Operator pada Saat Bekerja Menggunakan Metode Ovako Working Analysis System (OWAS)

Firman Zuhuri Yanto; Sutrisno Sutrisno

doi:10.30998/string.v7i3.14748

Analisis Postur Tubuh Operator pada Saat Bekerja Menggunakan Metode Ovako Working Analysis System (OWAS)

Firman Zuhuri Yanto^(1*), Sutrisno Sutrisno⁽²⁾

(1)
(2) Universitas Singaperbangsa Karawang
(*) Corresponding Author

Abstract

One of the interesting topics that is needed to be analyzed and studied more deeply in a study is analysis to find out the posture of a worker in carrying out a job. Work posture is a decisive point in analyzing the effectiveness of a job. If operators have a good and ergonomic work posture, they certainly have good job results. Operators who easily experience fatigue can be seen from the results of their completed work. Their work decreases and is not as expected, followed by various musculoskeletal complaints on parts of the skeletal muscles suffered by a person ranging from very slight to severe complaints. The complaints to injury are usually termed complaints of musculoskeletal disorders (MSDs) or complaints of musculoskeletal injuries. The OWAS method is a method that provides output in the form of a category of work attitudes that are at risk of work accidents in the musculoskeletal section. Based on the results of research using the OWAS method, it is known that out of the 7 operators observed, 3 operators are in category 2, namely dangerous or require improvement in work posture, while 4 operators are in safe category

Keywords

Operator; Posture; Manual Material Handling; Ergonomic; OWAS

Full Text:

PDF

References

Tzu-Hsien Lee, Chia-Shan Han, "Analysis of Working Postures at a Construction Site Using the OWAS Method," Journal of Occupational Safety and Ergonomics, vol. 19, no. 2, p. 245–250, 2013.

D. Pramestari, "Analisis Postur Tubuh Pekerja Menggunakan Metode Ovako Work Posture Analysis System (OWAS)," IKRAITH-TEKNOLOGI, Vols. 1, NO. 2, pp. 24-24, 2017.

Dani R, Putri Mety Zalynda,Chevy Herli Sumerli, Analisis Postur Kerja Pengrajin Handycraft Menggunakan Nordic Body Map Dan Metode Rapid Upper Limb Assessment (RULA), Bandung: Skripsi(S1) thesis, Fakultas Teknik, Universitas Pasundan, 2018.

D. J. R. Nurzikiresa, "Perancangan Meja Kerja Adjustable Berdasarkan Analisis Risiko Postur Kerja Pada Karyawan Warehouse (Studi Kasus Pt Mataram Tunggal Garment)" Konf. Nas Penelit. Dan Pengabdi, p. 294–306, 2021.

Dircia Fernandes C, Muhammad Yusuf, RA Simanjuntak, "Analisis Postur Kerja Menggunakan Metode Rapid Upper Limb Assessment (Rula) Dan Ovako Working Posture Analysis System (Owas)," Jurnal Rekavasi, vol. 4. No 2, pp. 82-90, 2016.

Septiana, P. J., Poncorini, E., & Widyaningsih, V., "Hubungan Postur Kerja Dengan Risiko Terjadinya Musculoskeletal Disorders Pada Buruh Angkut," Semin. Nas. Kesehat. Masy. Ums, p. 37–146, 2019.

A. Tjahayuningtyas, "Faktor Yang Mempengaruhi Keluhan Musculoskeletal Disorders (Msds) Pada Pekerja Informal," Indones. J. Occup. Saf. Heal, Vols. 8, No 1, pp. 1-10, 2019.

R. M. Ramadhani, "Analisis Penilaian Ergonomi Postur Kerja Ketika Memasang Roda Dengan Metode Ovako Work Posture Analysis System Dan Rapid Entire Body Assesment Untuk Mencegah Musculoskeleal Disorders Analisis," Jurnal Teknik dan Keselamatan, vol. 2. No. 1, pp. 233-243, 2019.

Restuputri, D. P., Primadi, E. S., & Lukman, M, "Analisa Postur Kerja Terhadap Aktivitas Manual Material Handling Menggunakan Metode Owas," Semin. Nas. Teknol. Dan Rekayasa, pp. 1-8, 2017.

DOI: http://dx.doi.org/10.30998/string.v7i3.14748