Perancangan Ulang Tata Letak Fasilitas Produksi Stainless Steel Menggunakan Metode SLP dan CRAFT

Muhammad Fatra Noer; Surya Perdana; Arif Rahman

doi:10.30998/string.v9i1.24477

Perancangan Ulang Tata Letak Fasilitas Produksi Stainless Steel Menggunakan Metode SLP dan CRAFT

Muhammad Fatra Noer⁽¹⁾, Surya Perdana⁽²⁾, Arif Rahman^(3*)

(1) Universitas Indraprasta PGRI
(2) Universitas Indraprasta PGRI
(3) Universitas Indraprasta PGRI
(*) Corresponding Author

Abstract

CV. Asta Karya Abadi is a manufacturing industry that operates as a supplier of quality stainless steel products. Poor layout design in factories causes cross movement between departments and results in excessive total material movement, for this reason this research aims to redesign work stations. To solve the facility layout problem at CV Asta Karya Abadi, the SLP and CRAFT methods, as well as Promodel Software, were used. Based on the actual layout, the total displacement moment is 285,948 m/ 3 months, the displacement moment value in the proposed layout using the SLP method has a value of 194,298 m/ 3 months and the CRAFT method has a value of 280,729 m/ 3 months. Redesign the layout of production facilities at CV. Asta Karya Abadi, which was built, succeeded in arranging work station provisions so that an efficient process flow was formed. It can be proven from the results of the pro model simulation that the process flow is U-shaped and there is no cross movement between departments.

Keywords

Design; layout; Cross Movement; SKILL; Promodels

Full Text:

PDF

References

A. Hamzah, “Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Metode Systematic Layout Planning (SLP) Dan 5S DI CV. Seken Living,” IEJST (Industrial Eng. J. Univ. Sarjanawiyata Tamansiswa), vol. 4, no. 1, pp. 10–21, 2020.

T. H. Suryatman, H. Hartono, and R. M. Fadil, “Usulan Perbaikan Tata Letak Fasilitas Produksi Yarn Processing dengan Metode Systematic Lay Out Planning (Studi Kasus Di PT. AP Tbk.),” J. Tek., vol. 8, no. 1, pp. 100–106, 2019, doi: 10.31000/jt.v8i1.1624.

D. Darsini, S. Adji, and W. Wijianto, “Perencaanaan Ulang Tata Letak Menggunakan Metode Slp (Systematic Layout Planning) Dan Craft (Computerized Relative Allocation of Facilities Techniques) Pada Pabrik Plywood Tunas Subur Pacitan,” J. Muhammadiyah Manaj. Bisnis, vol. 4, no. 1, pp. 19–26, 2023, doi: 10.24853/jmmb.4.1.19-26.

G. Rafael, L. Widodo, and Adianto, “Relayout Lantai Produksi Springbed Menggunakan Metode Slp, Corelap Serta Simulasi Promodel, Dan Flexsim,” J. Ilm. Tek. Ind., vol. 11, no. 2, pp. 90–103, 2023, doi: 10.24912/jitiuntar.v11i2.21213.

A. Yulia, “Perancangan Ulang Tata Letak Fasilitas Pabrik PD Ayam Ras dengan Metode Systematic Layout Planning (SLP),” J. Rekayasa Sist. Ind., vol. 11, no. 2, pp. 121–128, 2022, doi: 10.26593/jrsi.v11i2.5005.121-128.

A. A. U. Nugeroho, “Usulan Perbaikan Tata Letak Fasilitas Pabrik Tahu dengan Metode Systematic Layout Planning,” J. Optimasi Tek. Ind., vol. 3, no. 2, pp. 65–69, 2021, doi: 10.30998/joti.v3i2.10452.

A. Pascagama, R. B. Prakasa, S. Maulida, T. N. Assahda, T. G. Tua, and W. A. Jauhari, “Perancangan Tata Letak Fasilitas Menggunakan Metode SLP (Systematic Layout Planning) pada UMKM Roti Shendy,” in Seminar dan Konferensi Nasional IDEC 2022, 2022, pp. 1–11, doi: 10.30587/matrik.v23i1.4072.

E. Hartari and D. Herwanto, “Perancangan Tata Letak Stasiun Kerja dengan Menggunakan Metode Systematic Layout Planning,” J. Media Tek. dan Sist. Ind., vol. 5, no. 2, pp. 118–125, 2021, doi: 10.35194/jmtsi.v5i2.1480.

J. Tampubolon et al., “Rancangan Ulang Tata Letak Fasilitas Lantai Produksi di PT XYZ dengan Menggunakan Metode Algoritma CORELAP,” JURITI PRIMA (Junal Ilm. Tek. Ind. Prima), vol. 4, no. 1, pp. 1–9, 2020.

L. Elvira, B. Suhardi, and R. D. Astuti, “Perancangan Ulang Tata Letak Fasilitas Menggunakan Metode Systematic Layout Planning Pada PT Pilar Kekar Plasindo,” Tekinfo J. Ilm. Tek. Ind. dan Inf., vol. 9, no. 1, pp. 34–46, 2021, doi: 10.31001/tekinfo.v9i1.870.

S. Saffanah, R. A. Imral, and A. A. Sibarani, “Usulan Perancangan Tata Letak Lantai Produksi Dengan Metode SLP Dan Blocplan Pada Produk Cutting Steel Pipe Di Cv. Abc Di Cileungsi,” J. Rekayasa Sist. Ind., vol. 8, no. 2, pp. 1–27, 2023.

J. Angelina and S. Suseno, “Perancangan Ulang Tata Letak Fasilitas Menggunakan Metode SLP Dan Algoritma CRAFT Pada CV . Andi Offset,” J. Sains Student Res., vol. 2, no. 4, pp. 470–485, 2024.

A. A. Sibarani, R. A. R. Putra, F. K. Anam, N. Illiyastia, A. P. W. Pangesti, and S. Suprianto, “Penataan Kembali Fasilitas pada CV X dengan Computerized Relative Allocation Of Facilities Technique,” Din. Rekayasa, vol. 19, no. 1, pp. 53–62, 2023, doi: 10.20884/1.dr.2023.19.1.550.

M. Mudhofar, H. C. Suroso, A. R. Rahadian, and L. N. Sholekhah, “Perancangan Ulang Tata Letak Fasilitas Produksi dengan Menggunakan Metode Systematic Layout Planning dan CRAFT untuk Mengurangi Biaya Material Handling pada PT. Prima Daya Teknik,” in Prosiding Seminar Nasional Teknologi Industri Berkelanjutan III (SENASTITAN III), 2023, no. Senastitan III, pp. 1–8.

K. Y. A. T. Devi and R. Prabowo, “Desain Optimal Tata Letak Fasilitas Dengan Menggunakan Metode CORELAP dan Algoritma CRAFT,” J. Tek., vol. 21, no. 2, pp. 208–216, 2023.

N. Kuswardhani and B. Suryadharma, “Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Metode Grafik Dan Metode Craft Di Ud. Primadona,” Agrointek J. Teknol. Ind. Pertan., vol. 15, no. 4, pp. 1114–1127, 2021, doi: 10.21107/agrointek.v15i4.9535.

DOI: http://dx.doi.org/10.30998/string.v9i1.24477