Usulan Perbaikan Proses Bisnis pada Pemesanan Mesin Roll Forming

Ahmad Bazy; Evi Yuliawati

doi:10.30998/string.v9i1.22180

Usulan Perbaikan Proses Bisnis pada Pemesanan Mesin Roll Forming

Ahmad Bazy⁽¹⁾, Evi Yuliawati^(2*)

(1) Institut Teknologi Adhi Tama Surabaya
(2) Institut Teknologi Adhi Tama Surabaya
(*) Corresponding Author

Abstract

In the manufacturing industry, the business process of selling roll forming machines plays an important role in producing products with high quality and high efficiency. Therefore, this research was conducted to improve the effectiveness of business processes on Vietsteel Brand Roll Forming Machine customer orders at PT Vinatech using the Business Process Improvement (BPI) method and streamlining techniques. The potential problems identified lie in making approval profile designs that are still done manually, which results in errors in machine design and delays in shipping goods. After improvements were made to business processes through upgrading efforts in the streamlining category, there was a significant decrease in resource usage and accelerated the customer order business process at PT Vinatech. Thus, the results of this research can support the improvement of quality and efficiency of business processes in customer orders of Vietsteel Brand Roll Forming Machine at PT Vinatech which has a positive impact on customer satisfaction and company profitability.

Keywords

Business Process; Business Process Improvement; Streamlining; Roll Forming Machine

Full Text:

PDF

References

K. Wu, Y. Sun, C. Cao, C. Zhou, Q. Liu, and X. Chang, “On Simulation Analysis of Plate Forming and Deformation Compensation Technology of the side roll for Four-roll Plate Bending Machine,” Procedia Eng., vol. 207, pp. 1617–1622, 2017, doi: 10.1016/j.proeng.2017.10.1088.

A. Rouzbeh, M. Sedighi, and R. Hashemi, “Effects of strain path on the microstructure, tensile properties, and formability of Al/Mg roll-bonded sheets,” J. Mater. Res. Technol., vol. 23, pp. 5318–5328, 2023, doi: 10.1016/j.jmrt.2023.02.148.

C. Su et al., “Rebound control in multipass roll forming of cap-shaped parts based on segmental boundary optimization function,” Mater. Des., vol. 225, p. 111512, 2023, doi: 10.1016/j.matdes.2022.111512.

N. ?ati? et al., “Aerosol-jet printing facilitates the rapid prototyping of microfluidic devices with versatile geometries and precise channel functionalization,” Appl. Mater. Today, vol. 19, 2020, doi: 10.1016/j.apmt.2020.100618.

F. Kahloun and S. A. Ghannouchi, “Improvement of Quality for Business Process Modeling Driven by Guidelines,” Procedia Comput. Sci., vol. 126, pp. 39–48, 2018, doi: 10.1016/j.procS.2018.07.207.

D. S. Dewi, B. Syairudin, and E. N. Nikmah, “Risk Management in New Product Development Process for Fashion Industry: Case Study in Hijab Industry,” Procedia Manuf., vol. 4, no. Iess, pp. 383–391, 2015, doi: 10.1016/j.promfg.2015.11.054.

N. Abiya, N. Y. Setiawan, and N. H. Wardani, “Perbaikan Proses Bisnis Menggunakan Metode Business Process Improvement (BPI)(Studi Kasus Online Requisition (ORAS) Pada PT Freeport Indonesia),” J. Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 3, no. 3, pp. 3047–3052, 2019.

F. Pratomo, “Streamlining Proses Bisnis Penyiapan Press Release Inflasi,” Infotek J. Inform. dan Teknol., vol. 4, no. 2, pp. 125–130, 2021.

S. D. Larasati, S. A. Wicaksono, and N. H. Wardani, “Perbaikan Proses Bisnis Menggunakan Metode Business Process Improvement ( BPI ) ( Studi Pada Bagian Riset Pemasaran dan Pusat,” J. Pengemb. Teknol. Inf. dan Ilmu Komput. Univ. Brawijaya, vol. 1, no. 11, pp. 1425–1432, 2017.

I. M. A. Pradnyana and I. M. E. Listartha, “Business process improvement design of complaints on technical information system problems using the business process improvement method,” J. Phys. Conf. Ser., vol. 1810, no. 1, 2021, doi: 10.1088/1742-6596/1810/1/012031.

DOI: http://dx.doi.org/10.30998/string.v9i1.22180