Analisis Produktivitas Mesin Cutting Menggunakan Metode Overall Equipment Effectiveness di PT ABC

Muhammad Fery Athallah; Fahriza Nurul Azizah; Wahyudin Wahyudin

doi:10.30998/string.v8i3.20637

Analisis Produktivitas Mesin Cutting Menggunakan Metode Overall Equipment Effectiveness di PT ABC

Muhammad Fery Athallah^(1*), Fahriza Nurul Azizah⁽²⁾, Wahyudin Wahyudin⁽³⁾

(1)
(2) Universitas Singaperbangsa Karawang
(3) Universitas Singaperbangsa Karawang
(*) Corresponding Author

Abstract

PT ABC is a company that produces cigarette paper and packaging boxes for cigarette products, food, and also some products. In the company there is a MK920YMI cutting machine that operates continuously without stopping so that damage often occurs due to continuous operation without stopping and can affect the productivity of the machine. The purpose of this study is to determine the performance level of the cutting machine and find out the factors that cause problems and solutions. This research uses the Overall Equipment Effectiveness (OEE) method which is based on three main components, namely availability, performance, and quality. Based on the results of data processing that has been done, it can be concluded that the OEE value of the cutting machine is 81,33%, the availability rate is 95%, the performance rate is 86%, and the quality rate is 99.43%. By analyzing the factors that cause problems on the machine using a cause-and-effect diagram, it can be analyzed that the cause of the low overall equipment effectiveness value on the machine is influenced by the low performance value of human factors, machines, methods, environment, and equipment.

Keywords

Overall Equipment Effectiveness; Maintenance; Fishbone Diagram

Full Text:

PDF

References

A. B. Sulistyo and T. Zakaria, “Analisis Overall Equipment Effectiveness Mesin Vertical Roller Mill (Vrm) di PT. Cemindo Gemilang,” J. InTent, vol. 2, no. 1, pp. 17–31, 2019.

C. S. Bakti and H. Kartika, “Perawatan Mesin dengan Metode Overall Equipment Effectiveness (OEE),” JITKOM (Jurnal Ilmu Tek. dan Komputer), vol. 3, no. 1, pp. 31–38, 2019.

S. S. Islam, “Analisis Preventive Maintenance Pada Mesin Produksi dengan Metode Fuzzy FMEA,” JTT (Jurnal Teknol. Terpadu), vol. 8, no. 1, pp. 13–20, 2020, doi: 10.32487/jtt.v8i1.766.

E. Rimawan and A. Raif, “Analisis Pengukuran Nilai Overall Equipment Effectiveness (OEE) Pada Proses Packaging Di Line 2 (Studi Kasus Pt. Multi Bintang Indonesia. Tbk),” Sinergi, vol. 20, no. 2, p. 140, 2016, doi: 10.22441/sinergi.2016.2.008.

J. A. D. I. Septian, K. L. Mandagie, and W. T. Bhirawa, “Analisis Sistem Pemeliharaan Pada Mesin Mounter Chip Menggunakan Perhitungan Overall Equipment Effectiveness (Oee) Di Pt. Dharma Anugerah Indonesia,” J. Tek., vol. 10, no. 1, pp. 32–47, 2013, doi: 10.35968/jtin/v11i1/707.

N. Fajrah and N. Noviardi, “Analisis Performansi Mesin Pre-Turning dengan Metode Overall Equipment Effectiveness pada PT APCB,” J. Optimasi Sist. Ind., vol. 17, no. 2, pp. 126–134, 2018, doi: 10.25077/josi.v17.n2.p126-134.2018.

D. Wibisono, “Analisis Overall Equipment Effectiveness (OEE) Dalam Meminimalisasi Six Big Losses Pada Mesin Bubut (Studi Kasus di Pabrik Parts PT XYZ),” J. Optimasi Tek. Ind., vol. 3, no. 1, pp. 7–13, 2021, doi: 10.30998/joti.v3i1.6130.

A. Riyanto, I. Primiana, Yunizar, and Y. Azis, “Reengineering support for competitive advantage through organizational basis, information and communication technology: A literature review,” Probl. Perspect. Manag., vol. 16, no. 3, pp. 464–476, 2020, doi: 10.21511/PPM.16(3).2018.37.

M. M. Hutabarat and A. Muhsin, “Analisis Tingkat Efektivitas Kerja pada Mesin Auto Hanger dengan Menggunakan Metode Overall Equipment Effectiveness (OEE),” Opsi, vol. 13, no. 1, p. 56, 2020, doi: 10.31315/opsi.v13i1.3468.

M. A. Pradaka and J. Aidil SZS, “Analisis Total Productive Maintenance Menggunakan Metode OEE dan FMEA pada Pabrik Phosporic Acid PT Petrokimia Gresik,” J. Tek. Ind., vol. 11, no. 3, pp. 280–289, 2021, doi: 10.25105/jti.v11i3.13087.

A. Oktafianto and D. Puspitasari, “Analisis Efektifitas Mesin Berdasarkan Perhitungan Nilai Overall Equipment Effectiveness pada Mesin Pembuat Rokok ( Single Procession Unit 02 dan Single Procession Unit 03 ) di PT Djarum,” Ind. Eng. Online J., vol. 6, no. 1, pp. 1–11, 2018.

I. Saharani and S. Sukanta, “Analisis Efektifitas Mesin Pewarna Serat Optik Dengan Metode Overall Equipment Effectiveness (OEE) (Studi Kasus PT. Voksel Electric Tbk.),” STRING (Satuan Tulisan Ris. dan Inov. Teknol., vol. 5, no. 3, p. 263, 2021, doi: 10.30998/string.v5i3.8531.

J. Bhakti, N. Muhammad, R. Fauzan, and F. N. Azizah, “Analisis Efektivitas Menggunakan Metode Overall Equipment Effectiveness dalam Mengidentifikasi Six Big Losses pada Mesin Bubut SY-GF 2500H (Studi Kasus CV Jasa Bhakti),” J. Rekayasa Sist. dan Ind., vol. 9, no. 1, pp. 11–20, 2022, [Online]. Available: https://doi.org/10.25124/jrsi.v9i01.501

O. Rabiatussyifa, F. N. Azizah, and A. D. Ardhani, “Analisis Produktivitas Mesin Buffing Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. XYZ Cikarang, Jawa Barat,” J. Ilm. Wahana Pendidik., vol. 8, no. 3, pp. 95–102, 2022, doi: 10.5281/zenodo.6301691.

M. Nur, “Analisis Nilai Overall Equipment Effectiveness Pada Mesin Packer Di PT. Semen Padang Unit Produksi Dan Pengantongan Dumai,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 3, no. 2, p. 110, 2017, doi: 10.24014/jti.v3i2.5575.

D. I. Rinawati and N. C. Dewi, “Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Effectiveness (OEE) dan Six Big Losses pada Mesin Cavitec di PT. Essentra Surabaya,” Pros. Semin. Nas. Teknol. dan Inform., vol. 11, no. 1, pp. 21–26, 2014.

I. M, Sayuti, “Analisis Produktivitas Perawatan Mesin dengan Metode TPM (Total Productive Maintenance) Pada Mesin Mixing Section,” Malikussaleh J. Mech. Sci. Technol., vol. 4, no. 2, pp. 10–13, 2016.

A. Rahayu, “Evaluasi Efektivitas Mesin Kiln dengan Penerapan Total Productive Maintenance pada Pabrik II/III PT Semen Padang,” J. Optimasi Sist. Ind., vol. 13, no. 1, p. 454, 2016, doi: 10.25077/josi.v13.n1.p454-485.2014.

DOI: http://dx.doi.org/10.30998/string.v8i3.20637