Pemanfaatan Software Heat Transfer Research Inc. (HTRI) dalam Perancangan Double-Pipe Heat Exchanger

Ronald Akbar

doi:10.30998/string.v8i1.16098

Pemanfaatan Software Heat Transfer Research Inc. (HTRI) dalam Perancangan Double-Pipe Heat Exchanger

Ronald Akbar^(1*)

(1) Institut Teknologi Indonesia
(*) Corresponding Author

Abstract

The design of a double-pipe heat exchanger has been carried out. This study aimed to compare the overall heat transfer coefficient from the double pipe heat exchanger design with the HTRI software output results. The overall heat transfer coefficient value in the manual calculation process is 221.53 W/m²K. The design process with HTRI software was carried out by inputting data from design cases into the software. From the running results, the overall heat transfer coefficient is 213.58 W/m2K. The results compared to produce a deviation of 3.67%. The results of this deviation are considered very good because it is far below the deviation value targeted in this study, which is . The HTRI software is beneficial as a validation tool and a complement to the heat exchanger design process.

Keywords

Double-pipe heat exchanger; design; overall heat transfer coefficient; HTRI

Full Text:

PDF

References

Septian, Bary, P.D Rey, dan A. Aziz. "Desain dan Rancang Bangun Alat Penukar Kalor (Heat Exchanger) Jenis Shell dan Tube." Baut dan Manufaktur, vol. 3, no. 01, 2021, pp. 52-60.

M.J. Moran, H.N Shapiro, D.D Boettner, and M.B Bailey. Fundamentals of Engineering Thermodynamics. John Wiley & Sons, 2010.

S.M. Ghiaasiaan. Two-Phase Flow, Boiling, and Condensation: In Conventional and Miniature Systems. Cambridge University Press, 2017.

N. Putra. Alat Penukar Kalor. Departemen Teknik Mesin Universitas Indonesia, 2012.

O. Arsenyeva, J. Tran, M. Piper, and E. Kenig. "An Approuch for Pillow Plate Heat Exchangers Design for Single Phase Application" Applied Thermal Engineering, vol. 147, 2019, pp. 579-591.

Bakar, R.Y Halim, dan E. Nurfiman. "Analisis Jenis Cairan Pendingin Terhadap Laju Perpindahan Kalor Pada Sistem Pendingin Radiator." Jurnal Ilmiah Sains, Teknologi dan Rekayasa, vol. 2, no. 1, 2022.

Lemmon, W. Eric. "Nist Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-Refprop, Version 10.0, ational Institute of Standards and Technology." Standard Reference Data Program, Gaithersburg, 2018.

G. Towler and R. Sinnott. Chemical Engineering Design: Principles, Practice and Economics of Plant and Process Design. Butterworth-Heinemann, 2021.

S.I. Benton and M.R. Visbal . "The Onset of Dynamic Stall at a High, Transitional Reynolds Number." Journal of Fluid Mechanics, vol. 861, 2019, pp. 860-885.

K.T. Lau, S. Ahmad, C.K. Cheng, S.A. Kahn, C.M. Eze, and J. Zhao "Review on Supercritical Fluids Heat Transfer Correlations, Part I: Variants of Fundamental Dimensionless Variables." Heat Transfer Engineering, 2023, pp. 1-17.

X. Wang, M. Yang, Z. Li, Z. Wang, and Y. Zhang. "Correlation for Turbulent Convection Heat Transfer in Elliptical Tubes by Numerical Simulations." International Journal of Heat and Mass Transfer, vol. 41, no. 4-5, 1998, pp. 809-810.

Y.A Cengel, and A.J. Ghajar. Heat and Mass Transfer: Fundamentals & Applications, Fifth Edition. 5 edition, McGraw-Hill Education, 2015.

A. Syuhada, R. Sary, dan Z. Zakirullah. "Pengaruh Diameter Hidrolik Terhadap Perpindahan Panas Kolektor Surya Belokan Tajam." Jurnal Teknik Mesin Unsyiah, vol. 7, no. 2, 2019, pp. 38-42.

S. Siahaan. "Pengaruh Baffle Cut terhadap Koefisien Perpindahan Kalor Menyeluruh dan Penurunan Tekanan Sebagai Unjuk Kerja Alat Penukar Kalor Shell and Tube Susunan Segitiga." Jurnal Ilmiah Core IT: Community Research Information Technology, vol. 10, no. 2, 2022.

DOI: http://dx.doi.org/10.30998/string.v8i1.16098