Rancang Bangun Sistem Deteksi Kebakaran pada Ruangan Berbasis Internet of Things (IoT)

Sari Suhartini; Mardian Peslinof; Muhammad Ficky Afrianto

doi:10.30998/string.v7i3.15493

Rancang Bangun Sistem Deteksi Kebakaran pada Ruangan Berbasis Internet of Things (IoT)

Sari Suhartini⁽¹⁾, Mardian Peslinof^(2*), Muhammad Ficky Afrianto⁽³⁾

(1) Prodi Fisika, Fakultas Sains dan teknologi Universitas Jambi
(2) Program Studi Fisika, Fakultas Sains dan Teknologi, Universitas Jambi
(3) Program Studi Fisika, Fakultas Sains dan Teknologi, Universitas Jambi
(*) Corresponding Author

Abstract

Indoor fire is usually contained by calling the fire department. However, firefighters sometimes arrive at the location when the fire burns. Room safety usually only uses APAR and has not implemented a detection system to detect fire. Therefore, a system is needed to minimize the fire. The research is conducted to design and manufacture an Internet of Things (IoT)-based indoor fire detection system and to look at the characteristics of the system using methods of problem analysis, design, system assembly, characteristic test and test data analysis. The system consists of smartphone monitoring and alert by utilizing IR flame, MQ-2 and MLX90614 sensors to detect fire indications and of NodeMCU ESP8266 as a microcontroller. The results obtained are an average error of 1.04% and accuracy of 98.92% on temperature readings, an average system precision of 93% on smoke readings and 98.8% on temperature readings. The warning received on the smartphone is less than 2 seconds. Monitoring results in the Electronics, Robotics and Automation Laboratory room do not detect any indication of fire.

Keywords

IoT; Fire Detection; Ir Flame, MQ-2; MLX90614

Full Text:

PDF

References

M. Hariansyah dan D. Prastowo, “Prototipe Sistem Pengamanan Kebakaran Ruangan Otomatis Berbasis ATMEGA16,” Electron. J. UIKA Bogor, pp. 26–31, 2017.

M. Rahman, “Sistem Pencegah Kebakaran Dengan Menggunakan Modul Berbasis Arduino,” J. Teknol. Inf. dan Komun., vol. IX, no. 2, pp. 67–71, 2019.

S. dan R. A. F. Sarmidi, “Pendeteksi Kebocoran Gas Menggunakan Sensor MQ-2 Berbasis Arduino Uno,” J. Manaj. dan Tek. Inform., vol. 3, no. 1, pp. 51–60, 2019.

U. Lestari, A. Hamzah, dan Walfikulinuha, “Purwarupa Sistem Pendeteksi Kebakaran Dalam Ruangan Menggunakan Mikrokontroler Arduino Berbasis SMS Gateway,” Jusikom J. Sist. Komput. Musirawas, vol. 6, no. 2, pp. 155–166, 2021.

A. Achmad dan S. Syarif, “Rancang Bangun Sistem Pendeteksi Kebakaran Ruangan Menggunakan Mikrokontroller Arduino Berbasis Internet of Things,” J. IT Media Inf. IT STMIK Handayani, vol. 10, no. 1, pp. 59–72, 2019.

T. Juwariyah, S. Prayitno, dan A. Mardhiyya, “Perancangan Sistem Deteksi Dini Pencegah Kebakaran Rumah Brbasis Esp8266 dan Blynk,” J. Transistor Elektro dan Inform. (TRANSISTOR EI, vol. 3, no. 2, pp. 120–126, 2018.

M. Irfan dan L. S, “Internet of Things (IoT) Dalam Pengembangan Pembelajaran di Universitas Muhammdiyah Malang,” Semin. Nas. Teknol. dan Rekayasa, pp. 44–51, 2019.

G. C. Palevi, A. Qustomiyah, dan D. U. Effendi, “Prototipe Sistem Pemadam Kebakaran Otomatis Berbasis Mikrokontroller Atmega328p,” Semin. Nas. Has. Ris., pp. 676–685, 2018.

D. Darussalam dan A. Azwardi, “Penggunaan IR Flame Sensor Sebagai Sistem Pendeteki Api Berbasis Mikrokontroler pada Simulator Fire Suppression System,” Semin. Nas. Tek. Mesin, pp. 603–611, 2019.

Y. dan Mukhammad dan A. S. Hyperastuty, “Sensitivitas Sensor MLX90614 Sebagai Alat Pengukur Suhu Tubuh Non-contact Pada Manusia,” J. IPJN, vol. 1, no. 2, pp. 51–53, 2020.

I. . Shaputra.R, Gunoto.P, “Kran Air Otomatis Pada Tempat Berwudhu Menggunakan Sensor Ultrasonik Berbasis Arduino Uno,” Sigma Tek., vol. 2, no. 2, pp. 192–201, 2019.

R. Gunadi, R. Rosalina, dan H. Ramza, “Alat Ukur Kedalaman Lubang Digital Dengan Memanfaatkan VL6180X,” Electr. Eng. Acta, vol. 1, no. 1, pp. 26–33, 2021.

K. A. Chrisyantar Hasiholan, Rakhmadhany Primananda, “Implementasi Konsep Internet of Things pada Sistem Monitoring Banjir menggunakan Protokol MQTT,” Pengemb. Teknol. Inf. dan Ilmu Komput., vol. 2, no. 12, pp. 6128–6135, 2018.

DOI: http://dx.doi.org/10.30998/string.v7i3.15493