Alat Pengatur Aliran Panas pada  Pengering Pakaian Berbasis Arduino

Zuly Budiarso; Eddy Nurraharjo; Antono Adhi; Hersatoto Listiyono

doi:10.30998/string.v7i3.15291

Alat Pengatur Aliran Panas pada Pengering Pakaian Berbasis Arduino

Zuly Budiarso^(1*), Eddy Nurraharjo⁽²⁾, Antono Adhi⁽³⁾, Hersatoto Listiyono⁽⁴⁾

(1) Universitas Stikubank Semarang
(2) Universitas Stikubank Semarang
(3) Universitas Stikubank Semarang
(4) Universitas Stikubank Semarang
(*) Corresponding Author

Abstract

Sensor is equipment needed to support the application of digital technology in various fields. The characteristics of a sensor that only produces analog quantities are a challenge itself in implementing digital technology using sensors. The combination of sensors and Arduino microcontrollers can be used to control various equipment systems. One of the applications of temperature sensors and Arduino microcontrollers is to control the flow of heat in a clothes dryer. The hot air generated by the equipment will burn the air in a tube. The resulting heat is flowed into the clothes dryer using a fan. To make the temperature in the clothes drying chamber stay at a certain point, a device is needed to regulate the flow of heat exhaled from the heating chamber. The regulation of the temperature is performed by adjusting the on and off buttons of two fans that blow hot air into the clothes drying chamber. By adjusting these two devices using a temperature sensor and Arduino microcontroller, the temperature in heating chamber can be maintained in a certain temperature point. The test results show that all the equipment used in the experiment work well.

Keywords

sensor; Arduino; used oil

Full Text:

PDF

References

Z. Budiarso, “Implementasi Sensor Ultrasonik untuk menentukan Panjang Gelombang Suara Berbasis Mikrokontroler,” Dinamik, Vol. 20, No 2 , 2015.

Y.Pratomo, Azharudin, A.A. Sani, "Rancang Bangun alat Pengolahan Oli Bekas Menjadi Bahan Bakar Cair Diesel Dengan Perlakuan Panas," Jurnal ProStek, Vol 1, No.2 Desember 2019

A.Pratama, Basyirun, and Y. W. Atmojo, "Rancang Bangun Kompor ( Burner) Brebahan Bakar Oli Bekas," Mekanika Majalah Ilmiah Mekanika Volume 19 Nomor 2 Maret 2020

T. Trihaditia dan M. L. Agustiawan, " Efektivita Rancang Ala ( Burner) Oli Bekas Dalam Mendukung Proses Sterilisasi Media Jamur Tiram ( Leurotus Astreatus),” Jurnal ProStek, Vol.1 No.2 Desember 2019

D. Ramadhani, D. N A’ini, and K.Adhianto, "Pemanfaatan Oli Bekas Sebagai Sumber Energi Terbarukan Untuk Pemanas Kandang Ayam Indukan Pada Budidaya Ayam Broiler," Jurnal Peternakan Lokal, Volume 3 Nomor 2 September 2021.

A. Intang, "Studi Pengaruh Pengaturan Lidah Api Pada Burner Terhadap Upaya Peningkatan Efisiensi Perpindahan Panas Pada Fired Heater-Water Tube Bolier," Jurnal Austenit, Volume 2, Nomor 2, Oktober 2014

Sun-Kuk Noh, Kuk-Se Kim, Yoo-Kang Ji, "Design of Room Monitoring System For Wireless Sensor Networks," International Jurnal Of Distributed Sensor Networks, 2013.

I G. M.N. Desnajaya, AA G.B.Ariana, and I.M.A. Nugraha, "Room Monitoring Uses ESP-12E Based DHT22 and BH1750 Sensor," Journal Of Robotic and Control (JRC), Volume 3, Issue 2, March 2022.

D.Prihatmoko, "Perancangan dan Implementasi Pengontrol Suhu Ruangan Berbasis Mikrokontroler Arduino Uno," Jurnal Simetris, Vol 7 No. 1 April 2016

F.A. Deswar and R.Pradana, "Monitoring Suhu Pada Ruang Server Menggunakan Wemos D1 R1 Berbsis Internet Of Things (IoT)," Jurnal Teknologia, Vol 12, No.1, Januari 2021

DOI: http://dx.doi.org/10.30998/string.v7i3.15291