Sistem Monitoring Kanopi Pintar Secara Real-time Berbasis IOT

Abdul Refli Gunawan; Aris Gunaryati; Ucuk Darusalam

doi:10.30998/string.v5i3.8205

Sistem Monitoring Kanopi Pintar Secara Real-time Berbasis IOT

Abdul Refli Gunawan^(1*), Aris Gunaryati⁽²⁾, Ucuk Darusalam⁽³⁾

(1) Universitas Nasional
(2) Universitas Nasional
(3) Universitas Nasional
(*) Corresponding Author

Abstract

Daily drying of clothes sometimes has problems when it rains. This makes the clothes wet again. A smart canopy system that can detect rain is needed to maximize daily work. In this study, a real-time smart canopy monitoring system was designed based on the Internet of Things and the ThingSpeak cloud platform that can monitor the status of the canopy and rainfall. This system uses a water sensor to detect rainwater. The maximum value of the sensor is 1024. Data processing uses NodeMCU which functions as a medium for processing and sending data. From the research conducted, the average time received by ThingSpeak is 1 second. The system is web-based, so monitoring is easy. Determination of the smart canopy action is determined using the fuzzy logic method with accuracy in determining the action of 100%.

Keywords

Arduino; Mikrokontroler; Sensor; Teknologi

Full Text:

PDF

References

N. A. Harahap, “Perancangan Prototype Jemuran Otomatis Menggunakan Sensor Air dan Sensor Ldr Berbasis Mikrokontroler Arduino Uno Dengan Metode Flc,” Media Inform. Budidarma, vol. 2 (1), no. ISSN. 2548-8368, 2018.

A. D. Darusman, M. Dahlan and F. S. Hilyana, “Rancang Bangun Prototype Alat Jemur Pakaian Otomatis Berbasis Arduino Uno,” J.Sismestris, vol. 9 (1), no. ISSN. 2252-4983, 2018.

R. G. Permana, E. Rahmawati, and Dzulkiflih, “Perancangan dan Pengujian Penakar Hujan Tipe Tipping Bucket Dengan Sensor Photo-Interrupter Berbasis Arduino,” J.Inovasi Fis. Indones., vol. 4 (3), no. ISSN. 2302-4216, 2015.

S. M. Subagio, R. T. Sudiarto, T. Cirebon K. Air, S. Uno A, “Prototype Sistem Kemanan Buka Tutup Atap Jemuran Otomatis Menggunakan Sensor Air Dan Light Dependent Resistor ( Ldr ),” vol. 8(2), pp. 161–172, 2018.

R. T. Subagio, Kusnadi, and T. Sudiarto, “Prototype Sistem Kemanan Buka Tutup Atap Jemuran Otomatis Menggunakan Sensor Air dan Light Dependent Resistor (LDR) Berasis Arduino,” J. Digit, vol. 8 (2), no. ISSN. 2088-589x, 2018.

Benyezza, M. Bouhedda, and K. Djellout, “Smart Irrigation System Based Thingspeak andArduino,” Int. Conf. Appl. Smart Sist, no. doi: 978-15386-6866-5, 2018.

S. Pasha, “ThingSpeak based sensing and monitoring system for IoT with Matlab Analysis,” Int. J. New Technol. Res., vol. 2 (6), no. ISSN: 2454-4116, 2016.

Mufida Elly, S, Nurajizah, and A. Abas, “Pengendali Atap Jemuran Otomatis dengan Sensor Cahaya Berbasiskan Mikrokontroler Atmega16,” Konf. Nas. Ilmu Sos. dan Teknol., no. ISBN. 978-602-61242-1-0, 2013.

DOI: http://dx.doi.org/10.30998/string.v5i3.8205