Implementasi Keselamatan dan Kesehatan Kerja pada Aktivitas Karyawan Menggunakan Metode HIRARC

Rachmat Budi Santoso; Kusnadi Kusnadi; Asep Erik Nugraha

doi:10.30998/string.v10i1.28074

Implementasi Keselamatan dan Kesehatan Kerja pada Aktivitas Karyawan Menggunakan Metode HIRARC

Rachmat Budi Santoso^(1*), Kusnadi Kusnadi⁽²⁾, Asep Erik Nugraha⁽³⁾

(1)
(2) Universitas Singaperbangsa Karawang
(3) Universitas Singaperbangsa Karawang
(*) Corresponding Author

Abstract

Occupational safety and health are important factors at this time for employees so that they can do their work productively. This is done to reduce the impact of the risk of work accidents on employees and the company. The problem faced by the company is that there are work accidents that occur in mixer machines and production room areas that have an impact on employee safety and health. The HIRARC method is used in this study as a tool to identify work accidents that occur, assess how much impact is caused by work accidents, and provide control to handle so that work accidents do not occur. The purpose of this study is to reduce the occurrence of work accidents in the company to achieve zero accidents. The results of the PT ABC study showed that the activities carried out had a fairly high risk so that they could cause disorders in the human body to cause death and could be prevented by actions such as adding air ventilation and tightening the use of PPE (Personal Protective Equipment).

Keywords

OHS; HIRARC; Zero Accident

Full Text:

PDF

References

S. S. A. Rumae, S. S. Russeng, and N. U. Mahmud, “Penerapan Manajemen Risiko Dengan Metode Hirarc Dalam Mencapai Zero Accident Di PT. Iki Makassar,” Jurnal Kesehatan Tambusai, vol. 4, no. 2, pp. 850–859, 2023.

M. Ramadhania, N. Saputra, D. Herdiansyah, and D. Dihartawan, “Analisis Hazard Identification, Risk Assesment, Determining Control (HIRADC) Pada Aktivitas Kerja di UD Ridho Abadi Tangerang Selatan Tahun 2020,” Environmental Occupational Health and Safety Journal, vol. 2, no. 1, pp. 59–68, 2021.

N. Simarmata, Dasar-Dasar Keselamatan Dan Kesehatan Kerja, no. May. 2023.

M. J. A. Lubis, G. Sihombing, and A. B. H. Yanto, “Analisis Resiko Kecelakaan Kerja Menggunakan Metode HIRARC Pada PT. Telkom Indonesia Jakarta Utara,” Journal of Industrial Management and Technology, vol. 5, no. 1, pp. 15–23, 2024, doi: 10.31294/imtechno.v5i1.2414.

B. Ardiyansyah, Ardhy Lazuardy, and Arief Nurdini, “Pengunaan Metode Hirarc Dalam Menganalisis Risiko K3 Pada Bagian Pengemasan,” Jurnal Teknik dan Science, vol. 3, no. 2, pp. 94–106, 2024, doi: 10.56127/jts.v3i2.1549.

N. A. C. Saragih and R. Fitriani, “Analisis K3 pada Mesin Milling, Mesin Bubut dan Ruangan Produksi di PT. Z Menggunakan Metode HIRARC,” Industrika : Jurnal Ilmiah Teknik Industri, vol. 8, no. 1, pp. 67–77, 2024, doi: 10.37090/indstrk.v8i1.1063.

N. M. Dewantari, A. Umyati, and F. Falah, “Hazard Identification Risk Assessment and Risk Control (HIRARC) pada Pembangunan Gedung Business Center,” Journal Industrial Servicess (Industrial Engineering Advance Research & Application), vol. 8, no. 1, p. 1, 2022, doi: 10.36055/jiss.v8i1.14405.

H. H. Marsudi and K. Kusnadi, “Analisis Implementasi Keselamatan Dan Kesehatan Kerja Di PT Empat Perdana Carton Dengan Metode Hirarc,” STRING (Satuan Tulisan Riset dan Inovasi Teknologi), vol. 9, no. 2, 2024.

K. P. Sari, M. Chairi, and R. P. Helin, “Analisis Risiko K3 Pada Proyek Gedung Rsud Pasaman Barat Dengan Metode Hirarc,” Jurnal Rivet (Riset dan Invensi Teknologi), vol. 2, no. 01, pp. 25–31, 2022, doi: 10.47233/rivet.v2i01.491.

R. Indrayani, J. Sastradiharja, and M. Rosanah, “Identifikasi Resiko Kerja Menggunakan Metode HIRARC pada UMKM Tahu di Bandung,” Sistemik (Jurnal Ilmiah Nasional Bidang Ilmu Teknik), vol. 9, no. 01, pp. 23–27, 2021, doi: 10.53580/sistemik.v9i01.52.

R. W. Malik and A. E. Nugraha, “Evaluasi Kesehatan dan Keselamatan Kerja Menggunakan Pendekatan HIRARC,” Innovative: Journal Of Social Science Research, vol. 3, no. 4, pp. 9445–9453, 2023, [Online].Available:http://jinnovative.org/index.php/Innovative/article/view/3467%0Ahttp://jinnovative.org/index.php/Innovative/article/download/3467/3317

R. M. Ramadhan, K. Kusnadi, and A. Suseno, “Analisis Pengendalian Risiko Kecelakaan Kerja Menggunakan Metode Hirarc Pada Area Produksi CV. Artana Engineering,” TEKNIKA (Journal of Information and Communication Technology), vol. 15, no. 01, pp. 115–130, 2021.

A. Khoirulloh, A. E. Nugraha, and M. Akbar, “K3 Performance Measurement in the Use of Personal Protective Equipment ( Ppe ) at PT . Tri Jaya Teknik Karawang,” JIEOM: Journal of Industrial Engineering and Operation Management, vol. 06, no. 01, pp. 9–16, 2023.

F. Rahman and D. Herwanto, “Identifikasi, Penilaian dan Pengendalian Risiko Kecelakaan Kerja dengan Metode HIRARC di PT ABC,” Jurnal Ilmiah Wahana Pendidikan, vol. 7, no. 1, pp. 168–175, 2021, doi: 10.5281/zenodo.6138505.

L. A. Indriyanti and H. Prastawa, “Analisis Risiko Kerja Menggunakan Job Safety Analysis (Jsa) Dengan Pendekatan Hazard Identification, Risk Assessment, Risk Control (Hirarc) Pada Bagian Converting Pt Jawasurya Kencana Indah,” Industrial Engineering Online Journal, vol. 13, no. 1, pp. 1–11, 2024.

H. Mauliyani, N. Romdhona, A. Andriyani, and M. Fauziah, “Identifikasi Risiko Keselamatan Kerja Metode (Hirarc) Pada Tahap Pembuatan Tangki Di Pt. Gemala Saranaupaya,” Environmental Occupational Health and Safety Journal, vol. 2, no. 2, p. 163, 2022, doi: 10.24853/eohjs.2.2.163-174.

T. P. Hakim, N. K. Ningrat, and E. Aristriyana, “Penerapan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) Dalam Menganalisis Potensi Kecelakaan Kerja Pada PT. Arkelindo Bara Sejahtera,” INTRIGA (Info Teknik Industri Galuh), Jurnal Mahasiswa Teknik Industri, vol. 1, no. 2, pp. 123–130, 2024, doi: 10.25157/intriga.v1i2.3896.

G. Samarandana, A. Momon, and J. Arifin, “Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assesment and Risk Control (HIRARC)),” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 7, no. 1, pp. 56–62, 2021.

L. Setiawan, A. Rahmatullah, I. Muhammad, A. S. Rini, S. Hanan, and T. R. H. Pratama, “Penerapan K3 Menggunakan HIRARC (Hazard Identification Risk Assessment and Risk Control) pada Perusahaan Konstruksi di Cilegon,” Industrika : Jurnal Ilmiah Teknik Industri, vol. 8, no. 2, pp. 268–278, 2024, doi: 10.37090/indstrk.v8i2.1516.

P. A. Della and R. H. A. Murti, “Identifikasi Bahaya Menggunakan Metode HIRARC Pada Pekerjaan Pemeliharaan Gardu dan Jaringan Distribusi PT PLN UP3 Cengkareng,” Antigen : Jurnal Kesehatan Masyarakat dan Ilmu Gizi, vol. 2, no. 2, pp. 39–51, 2024, doi: 10.57213/antigen.v2i2.257.

DOI: http://dx.doi.org/10.30998/string.v10i1.28074