Analisis Pengendalian Kualitas Part Cap Front dengan Metode Seven Tools di PT KMIL

Agung Dwi Kurniawan; Asep Erik Nugraha

doi:10.30998/string.v9i3.25100

Analisis Pengendalian Kualitas Part Cap Front dengan Metode Seven Tools di PT KMIL

Agung Dwi Kurniawan^(1*), Asep Erik Nugraha⁽²⁾

(1) Universitas Singaperbangsa Karawang
(2) Universitas Singaperbangsa Karawang
(*) Corresponding Author

Abstract

PT Kurnia Mustika Indah Lestari (KMIL) is a company engaged in stamping and dies maker that produces several parts for motorbikes and cars. One of the parts produced by the company is the part cap front. Where in the production process, the part cap front often produces defective parts every day. So this study aims to analyze the factors causing defects in the part cap front and to provide suggestions for quality improvements. This study uses the seven tools method used to analyze data. The data used in this study comes from the part cap front production data for the period January 2024. The findings of this study indicate that there are two types of defects in the part cap front, namely oblique welding and scratch. From the results of the pareto diagram, it is known that oblique welding defects are the most dominant defects with 66%. The control chart p used to analyze the control limits produced UCL 0,015 and LCL 0,011. Factors to determine the cause of defects in the fishbone diagram are human factors, machines, methods, materials, and the environment. The proposed improvements in this study are to provide training to operators to improve their skills, routinely carry out machine maintenance schedules, and always pay attention to the SOPs set by the company.

Keywords

Cap Front; Quality Control; Defect Product; Seven Tools

Full Text:

PDF

References

R. Rochmoeljati, I. Nugraha, T. N. Arier, and S. B. Hernanda, “Analisis Pengendalian Kualitas Produk Kaos PT. XYZ dengan Metode Six Sigma dan Kaizen,” in Prosiding Konsorsium Seminar Nasional Waluyo Jatmiko, Surabaya: Universitas Pembangungan Nasional Veteran Jawa Timur, 2023, pp. 481–490. doi: http://dx.doi.org/10.33005/wj.v16i1.72.

E. Haryanto and I. Novialis, “Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin CNC Lathe Dengan Metode Seven Tools,” J. Tek., vol. 8, no. 1, pp. 69–77, 2019, doi: http://dx.doi.org/10.31000/jt.v8i1.1595.

H. N. Laili and S. Suparto, “Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Pada Produk Sepatu Dengan Metode Six Sigma Dan Kaizen Di PT. Karya Mitra Budi Sentosa,” in Prosiding Seminar Nasional Sains dan Teknologi Terapan VII, Surabaya: Institut Teknologi Adhi Tama Surabaya, 2019, pp. 217–224. [Online]. Available: https://ejurnal.itats.ac.id/sntekpan/article/view/631

V. Gaspersz, Metode Analisis Untuk Peningkatan Kualitas. Jakarta: PT Gramedia Pustaka Utama, 2001.

J. Heizer and B. Render, Operations Management-manajemen Operasi. Jakarta: Salemba Empat, 2013.

B. Render and J. Heizer, Operations Management Sustainability and Supply Chain Management. New York: Pearson Education, 2014.

H. Darmawan, S. Hasibuan, and H. H. Purba, “Application of Kaizen Concept with 8 Steps PDCA to Reduce in Line Defect at Pasting Process: A Case Study in Automotive Battery,” International Journal of Advances in Scientific Research and Engineering, vol. 4, no. 8, pp. 97–107, 2018, doi: http://dx.doi.org/10.31695/ijasre.2018.32800.

F. Farchiyah, “Analisis Pengendalian Kualitas Spanduk Dengan Metode Seven Quality Control Tools (7 QC) Pada PT. Fajar Interpratama Mandiri (FIM PRINTING),” Tekmapro Journal of Industrial Engineering and Management, vol. 16, no. 1, pp. 36–47, 2021, doi: http://dx.doi.org/10.33005/tekmapro.v16i1.187.

F. A. Ansori and I. N. Gusniar, “Penerapan Metode Seven Tools pada Pengendalian Kualitas Produk Cacat di PT. XYZ,” Jurnal Serambi Enggineering., vol. 8, no. 2, pp. 5970–5978, 2023, doi: http://dx.doi.org/10.32672/jse.v8i2.5991.

R. Faurika, R. Fitriani, and D. N. Rinaldi, “Analisis Kualitas Produk Imprabox Menggunakan Metode Seven Tools,” STRING (Satuan Tulisan Riset dan Inovasi Teknologi, vol. 8, no. 2, pp. 189–198, 2023, doi: http://dx.doi.org/10.30998/string.v8i2.16999.

E. Meiliana, W. Fatmawati, and A. Sugiyono, “Pengendalian Kualitas Briket Arang Batok Kelapa Menggunakan Metode Seven Tools,” J. Tek. Ind., vol. 2, no. 2, pp. 113–120, 2023, doi: http://dx.doi.org/10.30659/jurti.2.2.113-120.

D. Prihandoko, E. Fania, and J. N. Julita, “Pengendalian Kualitas Produksi Teh TB 4 Asli RCLT Menggunakan Metode Seven Tools Pada PT. XYZ,” Jurnal Manajemen, Bisnis dan Organisasi, vol. 4, no. 1, pp. 1–18, 2020, doi: http://dx.doi.org/10.33772/jumbo.v4i1.12099.

A. Firdaus, P. Vitasari, and E. Adriantantri, “Pengendalian Kualitas Produk Cacat Menggunakan Metode Seven Tools Di CV Berkat Anugrah,” E-Jurnal Mahasiswa Teknik Industri (Jurnal Valtech), vol. 6, no. 2, pp. 157–164, 2023, doi: https://doi.org/10.36040/valtech.v6i2.7339.

C. W. Kusuma and C. O. Doaly, “Analisis Pengendalian Kualitas Proses Produksi Sol Sandal Pada PT. Cipta Prima,” in Prosiding Seri Seminar Nasional (SERINA) Ke-III Universitas Tarumanagara, Jakarta: Universitas Tarumanagara, 2021, pp. 487–494. doi: https://doi.org/10.24912/pserina.v1i1.17500.

J. Heizer and B. Render, Manajemen Operasi: Manajemen Keberlangsungan dan Rantai Pasokan Edisi ke-11. Jakarta: Salemba Empat, 2015.

M. N. Nasution, Manajemen Mutu Terpadu (Total Quality Management) Edisi Ketiga. Bogor: Ghalia Indonesia, 2015.

P. D. Cahyo and S. Siswiyanti, “Analisa Quality Control Circle (QCC) Produk Bracket Radio Mounting Dengan Metode Seven Tools Di PT. Sadiyah Cahaya Logam,” in Prosiding Seminar Nasional Teknik Industri UPS Tegal, Tegal: UPS Tegal, 2023, pp. 95–105. [Online]. Available: https://semnas.upstegal.ac.id/index.php/SNaTIPs/article/download/793/477

DOI: http://dx.doi.org/10.30998/string.v9i3.25100