Perancangan Tata Letak Fasilitas Konveksi Roemah Dia Menggunakan Metode SLP

Uki Aulia Rosalina; Adik Ahmad Unggul Nugeroho; Surya Perdana

doi:10.30998/string.v9i3.24992

Perancangan Tata Letak Fasilitas Konveksi Roemah Dia Menggunakan Metode SLP

Uki Aulia Rosalina^(1*), Adik Ahmad Unggul Nugeroho⁽²⁾, Surya Perdana⁽³⁾

(1) Universitas Indraprasta PGRI
(2) Universitas Indraprasta PGRI
(3) Universitas Indraprasta PGRI
(*) Corresponding Author

Abstract

The increasing consumer demand for mukena products has an impact on the production process which is required to be fast until the product reaches the consumer. However, the long distance between the production process which is still separated by the location between the warehouse and the production floor causes the ineffectiveness of the production process. To overcome this, Konveksi Roemah Dia must increase production by designing a new production site that has a layout with a minimum distance between production rooms. The purpose of this study is to design a production layout using the Systematic Layout Planning (SLP) method to design the relationship between activities. The results of data processing obtained a floor area between raw materials, cutting tables, sewing machines, embroidery machines, quality control, to finished product warehouses of 43.36 m2. Furthermore, a table of the level of activity proximity relationships was created using the Activity Relationship Chart (ARC) which was summarized into the Worksheet for Activity Relationship Diagram (WARD), then a new layout experiment was made using the Activity Relationship Diagram (ARD), finally a proposed layout was made using the Area Allocation Diagram (AAD) with a U-shaped pattern and a distance of movement between facilities of 13.5 m. The new production floor is carried out in the same place so that there is no waste of distance and time for the material movement process.

Keywords

Systematic Layout Planning; Activity Relationship Diagram; Worksheet Activity Relationship Diagram; Activity Relationship Diagram, Area Allocation Diagram.

Full Text:

PDF

References

S. Panrelli, M. Rexoprodjo, R. Safitri, and I. H. Lahay, “Perancangan Ulang Tata Letak Fasilitas Menggunakan Metode Systematic Layout Planning Pada Umkm Xyz,” J. Tek. Ind., vol. 27, no. 1, pp. 76–85, 2024.

B. Saputra, Z. ARifin, ST, MT, and A. Merjani, “Perbaikan Tata Letak Fasilitas Dengan Metode Systematic Layout Planning (SLP) Untuk Mengurangi Jarak Perpindahan Material (Studi Kasus UKM Kerupuk Karomah),” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 8, no. 1, pp. 71–82, 2020, doi: 10.33373/profis.v8i1.2557.

E. Hartari and D. Herwanto, “Perancangan Tata Letak Stasiun Kerja dengan Menggunakan Metode Systematic Layout Planning,” J. Media Tek. dan Sist. Ind., vol. 5, no. 2, pp. 118–125, 2021, doi: 10.35194/jmtsi.v5i2.1480.

N. A. Khofiyah, M. Rizki, B. Gea, T. N. Wiyatno, and Supriyati, “Evaluasi Tata Letak Fasilitas Pabrik untuk Meningkatkan Efisiensi Kinerja Menggunakan Metode SLP (Systematic Layout Planning): Studi Kasus PT. XYZ,” G-Tech J. Teknol. Terap., vol. 7, no. 4, pp. 1633–1642, 2023, doi: 10.33379/gtech.v7i4.3269.

Nurhidayat Fajar, “Usulan Perbaikan Tata Letak Fasilitas Lantai Produksi DenganMetode Systematic Layout Planning (SLP) di PT DSS,” J. IKRA-ITH Teknol., vol. 5, no. 1, pp. 9–16, 2021.

M. M. Abdurrahman, R. Kastaman, and T. Pudjianto, “Rancang Ulang Tata Letak Fasilitas Produksi untuk Efisiensi Produksi Kopi di PT Sinar Mayang Lestari Menggunakan Metode Systematic Layout Planning dan Software Blocplan,” Agrikultura, vol. 32, no. 2, p. 146, 2021, doi: 10.24198/agrikultura.v32i2.33610.

A. Fajri, “Perancangan Rrelokasi Tata Letak Gudang Dengan Metode Systematic Layout Planning Pada PT. MKM,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 7, no. 1, p. 27, 2021, doi: 10.24014/jti.v7i1.10533.

A. Pascagama, R. B. Prakasa, S. Maulida, T. N. Assahda, T. G. Tua, and W. A. Jauhari, “Perancangan Tata Letak Fasilitas Menggunakan Metode SLP (Systematic Layout Planning) pada UMKM Roti Shendy,” in Seminar dan Konferensi Nasional IDEC 2022, 2022, pp. 1–11. doi: 10.30587/matrik.v23i1.4072.

C. Anam, “Perancangan ulang tata letak untuk mengurangi jarak,” Peranc. Ulang Tata Letak Untuk Mengurangi Jarak Mater. Handl. Dengan Metod. Syst. Layout Plan., no. 3, 2022.

G. Rafael, L. Widodo, and Adianto, “Relayout Lantai Produksi Springbed Menggunakan Metode Slp, Corelap Serta Simulasi Promodel, Dan Flexsim,” J. Ilm. Tek. Ind., vol. 11, no. 2, pp. 90–103, 2023, doi: 10.24912/jitiuntar.v11i2.21213.

M. Linsyi Daissurur, “Perancangan Tata Letak dengan Metode Systematic Layout Planning,” Pros. SAINTEK Sains dan Teknol., vol. 2, no. 1, pp. 400–405, 2023.

I. Adiasa, Sartika, and N. Hudaningsih, “Perancangan Tata Letak Fasilitas Gudang Pada Proyek Pembangunan Jetty Pltmgu Lombok Peaker Menggunakan Metode Systematic Layout Planning (Slp) Dengan Algoritma Blocplan,” J. Inform. Teknol. dan Sains, vol. 5, no. 1, pp. 202–209, 2023, doi: 10.51401/jinteks.v5i1.2609.

E. Joshua, K. L. Mandagie, and B. W. Utomo, “Perancangan Ulang Tata Letak Pabrik Pada Home Industry Pembuatan Ikat Pinggang Menggunakan Metode Systematic Layout Planning (Slp),” J. Tek., vol. 12, no. 2, pp. 139–152, 2013, doi: 10.35968/jtin.v12i2.1155.

D. Darsini, S. Adji, and W. Wijianto, “Perencaanaan Ulang Tata Letak Menggunakan Metode Slp (Systematic Layout Planning) Dan Craft (Computerized Relative Allocation of Facilities Techniques) Pada Pabrik Plywood Tunas Subur Pacitan,” J. Muhammadiyah Manaj. Bisnis, vol. 4, no. 1, pp. 19–26, 2023, doi: 10.24853/jmmb.4.1.19-26.

F. Z. Martin, M. I. Hadiyul Umam, Melfa Yola, H. Harpito, and Muhammad Nur, “Usulan Perbaikan Tata Letak Fasilitas Menggunakan Metode Systematic Layout Planning (Slp) Dan Simulasi Arena,” J. Perangkat Lunak, vol. 6, no. 1, pp. 166–180, 2024, doi: 10.32520/jupel.v6i1.3071.

DOI: http://dx.doi.org/10.30998/string.v9i3.24992