Perancangan Perangkat Lunak Perhitungan Biomekanik dengan Microsoft Visual Basic 6.0
(1) Universitas Indraprasta PGRI
(2) Universitas Indraprasta PGRI
(3) Universitas Indraprasta PGRI
(*) Corresponding Author
Abstract
Practicum Design of Industrial Engineering (DIE) I was one of the existing courses in Industrial Engineering University X. One of which is discussed in DIE I is Biomechanics. Biomechanics is one branch of ergonomics that discussed about body mechanics for doing a job. In practicum of DIE I included in biomechanics is the Recommended Weight Limit (RWL), Lifting Index (LI), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA). During this time, the calculation method of RWL, LI, RULA, and REBA on practicum DIE I still manually which causes the calculation becomes longer further practicum be delayed. This research aims to make the Software of calculation biomechanics by using Microsoft Visual Basic 6.0. Software that is made just for calculating RWL, LI, RULA and REBA. Based on testing by respondents as many as 21 people found the average time of manual calculation and software calculation. In completing the calculation, manual calculation takes an average of 297.246 seconds, while calculation with Software takes an average of 32.584 seconds. So that with the completion of the software, the calculation of biomechanics can be quickly resolved.
Keywords
Full Text:
PDFReferences
A. Septianto, “Analisa Biomekanika Kerja Dan Lingkungan Fisik Kerja Terhadap Kepuasan Kerja Pegawai,” JITMI, vol. 2, no. 1, pp. 52–60, 2019.
M. Zeki, Iskandar, and M. Iqbal, “Analisis Efektifitas Kerja Pengangkatan Beban Pada Bagian Pengantongan Di PT. Pupuk Krueng Geukuh,” Ind. Eng. J., vol. 6, no. 2, pp. 53–60, 2017.
R. Purwaningsih, D. Ayu P, and N. Susanto, “Desain Stasiun Kerja Dan Postur Kerja Dengan Menggunakan Analisis Biomekanik Untuk Mengurangi Beban Statis Dan Keluhan Pada Otot,” J. Tek. Ind. UNDIP, vol. XII, no. 1, pp. 15–22, 2017.
K. T. Sanjaya, N. H. Wirawan, and B. Adenan, “Analisis Postur Kerja Manual Material Handling Menggunakan Biomekanika dan NIOSH,” JATI UNIK, vol. 1, no. 2, pp. 70–80, 2018.
M. Siska and S. A. Angrayni, “Analisis Postur Kerja Manual Material Handling pada Aktivitas Pemindahan Pallet Menggunakan Rappid Upper Limb Activity (RULA) di PT. Alam Permata Riau,” J. Sains, Teknol. dan Ind., vol. 15, no. 2, pp. 77–86, 2018.
Lindawati and Mulyono, “Evaluasi Postur Kerja Pengrajin Batik Tulis Aleyya Batik Di Yogyakarta,” JPH RECODE, vol. 1, no. 2, pp. 131–143, 2018.
M. S. Setiawan, I. W. Kirana, A. D. Cahyani, and M. R. Suryoputro, “Penilaian Postur Pekerja Pengangkatan Galon Dengan Metode REBA dan Biomekanika,” in Seminar dan Konferensi Nasional IDEC, 2019, pp. 1–8.
Tiara and S. Perdana, “Analisis Postur Kerja Pada Pembuatan Rumah Boneka Dengan Metode Rapid Entire Body Assessment,” J. String, vol. 3, no. 2, pp. 107–118, 2018.
DOI: http://dx.doi.org/10.30998/string.v6i3.11098
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 maesa alif badra fataya Alif badra Fataya, tiara tiara, Surya Perdana
This work is licensed under a Creative Commons Attribution 4.0 International License.
STRING (Satuan Tulisan Riset dan Inovasi Teknologi) indexed by:
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.
View My Stats