Perencanaan Sistem Pneumatik Sebagai Penggerak pada Pintu Gerbong Kereta

Jones Victor Tuapetel(1*), Rohdi Narwalutama(2)

(1) Institut Teknologi Indonesia
(2) Institut Teknologi Indonesia
(*) Corresponding Author

Abstract


Pneumatic system is a system that is used as an automation system today by using air as its driver. The use of pneumatic systems in this planning aims to be used to open and close the doors of train cars. To get the pneumatic design as desired, a design and simulation is made using Festo Fluid Simulator. The result of the planning of a pneumatic system circuit produces a circuit according to its function. Based on calculations performed on force (1170.25 N) with speed (0.22 m/s) produced (5.68 s) to open the door and at force (1562.95 N) with speed (0.25 m/s) generated (4.68 s) to close the door. Simulation on Festo Fluid Simulator with the addition of one way valve (63%) with its mounting influence to close the door resulted in speed (0.25 m/s) and one way valve installation effect (61%) to open resulting in speed (0.21 m/s).

 


Keywords


pneumatic system; train carriage doors; Festo Fluid Simulator

Full Text:

PDF

References


T. A. Bora, K. S. Rajput and e. al, “A Review on Pneumatic Operated Train Door System,” pp. 472-477, 2019.

F. I. Anditha, T. Kabul, and W. Ym, “Perancangan dan Simulasi Elektro Pneumatik Holder Machinism Pada Sheet Metal Shearing Machine,” Profisiensi, vol. 5, no. 1, pp. 51–60, 2017.

F. Dinmohammadi, B. Alkali, M. Shafiee, C. Bérenguer, and A. Labib, “Risk Evaluation of Railway Rolling Stock Failures Using FMECA Technique: A Case Study of Passenger Door System,” Urban Rail Transit, vol. 2, no. 3–4, pp. 128–145, 2016, doi: 10.1007/s40864-016-0043-z.

S. Ham, S. Y. Han, S. Kim, H. J. Park, K. J. Park, and J. H. Choi, “A comparative study of fault diagnosis for train door system: Traditional versus deep learning approaches,” Sensors (Switzerland), vol. 19, no. 23, 2019, doi: 10.3390/s19235160.

S. Kim, N. H. Kim, and J. H. Choi, “Information value-based fault diagnosis of train door system under multiple operating conditions,” Sensors (Switzerland), vol. 20, no. 14, pp. 1–14, 2020, doi: 10.3390/s20143952.

Sumbodo, W., Setiadi, R., & Poedjiono, S. (2017). Pneumatik dan Hidrolik. Teknik Industri (1)

Krist, Thomas, “Fundamentele Pneumatiek,” in Dasar-dasar Pneumatik, jakarta, Erlangga, pp. 1-210, 1993.

Croser, P., Ebel, F., & Level, B. (n.d.). Pneumatics

Sudaryono, “Pneumatik dan Hidrolik,” Tek. Mekatronika, no. 1, pp. 13–14, 2013.

R. K. Akbar, “Dasar Pneumatik Modul Pembelajaran Teknik Mekatronika,” p. 100, 2017.




DOI: http://dx.doi.org/10.30998/string.v6i3.10536

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Rohdi Narwalutama

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 

STRING (Satuan Tulisan Riset dan Inovasi Teknologi) indexed by:

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.
View My Stats
Flag Counter