RANCANG BANGUN PROTOTYPE PENGENDALIAN LENGAN ROBOT (ROBOTIC ARM) SEBAGAI PEMINDAH BARANG BERBASIS INTERNET OF THINGS
(1) Universitas Trisakti
(2) Universitas Trisakti
(3) Sekolah Tinggi Teknologi Indonesia
(4) Sekolah Tinggi Teknologi Indonesia
(*) Corresponding Author
Abstract
This study proposes a prototype design of a robot arm control system based on the Internet of Things (IoT) by utilizing the NodeMCU microcontroller and the Blynk application. The NodeMCU microcontroller functions as a control system combined with four servo motors that are positioned as mechanical drives at the base, shoulder, elbow and grip of the robot arm. The angle settings of each motor are 180 °, 90 °, 60 ° and 90 ° which are used as actuators for lifting, gripping and moving loads. To control the robotic arm, the blynk application can be accessed via smartphone. From the results of the design and testing, it was found that the maximum load that could be moved was 20 grams with a transfer time of 46 seconds and a speed of 0.0054 seconds. The max-imum distance for moving goods is 25 cm and the types of goods being moved are those that have a rough sur-face. This research is useful as a solution for moving goods that can be controlled remotely
Full Text:
PDF (Indonesian)References
Sisinni, E., Saifullah, A., Han, S., Jennehag, U. and Gidlund, M., "Industrial internet of things: Challenges, opportunities, and directions," IEEE Transactions on Industrial Informatics, vol. 14, no. 11, pp. pp.4724-4734, 2018.
Wu, D., Shi, H., Wang, H., Wang, R. and Fang, H., "A feature-based learning system for Internet of Things applications," IEEE Internet of Things Journal, vol. 6, no. 2, pp. pp.1928-1937, 2018.
Sun, T., Yang, S. and Lian, B., Finite and instantaneous screw theory in robotic mechanism, Springer Nature, 2020.
Dewi, N.K., Mulyana, I., Putra, A.S. and Radita, F.R., "Konsep Robot Penjaga Toko Di Kombinasikan Dengan Pengendalian Virtual Reality (VR) Jarak Jauh," IKRA-ITH INFORMATIKA: Jurnal Komputer dan Informatika, vol. 5, no. 1, pp. pp.33-38, 2021.
Causo, A., Durham, J., Hauser, K., Okada, K. and Rodriguez, A., Advances on Robotic Item Picking, Springer International Publishing, 2020.
Hofer, M. and D’Andrea, R., 2020, "Design, fabrication, modeling and control of a fabric-based spherical robotic arm," Mechatronics, vol. 68, p. p.102369, 2020.
Sharma, K., Jain, N. and Pal, P.K., 2020, "Detection of eye closing/opening from EOG and its application in robotic arm control," Biocybernetics and Biomedical Engineering, vol. 40, no. 1, pp. pp.173-186, 2020.
Méndez, J.B., Perez-Vidal, C., Heras, J.V.S. and Pérez-Hernández, J.J., "Robotic Pick-and-Place Time Optimization: Application to Footwear Production," IEEE Access, vol. 8, pp. pp.209428-209440, 2020.
Xiang, W. and Yan, S., "Dynamic analysis of space robot manipulator considering clearance joint and parameter uncertainty: Modeling, analysis and quantification.," Acta Astronautica, vol. 169, pp. pp.158-169, 2020.
Nubert, J., Köhler, J., Berenz, V., Allgöwer, F. and Trimpe, S., "Safe and fast tracking on a robot manipulator: Robust mpc and neural network control," IEEE Robotics and Automation Letters, vol. 5, no. 2, pp. pp.3050-3057, 2020.
Tringali, A. and Cocuzza, S., "Globally optimal inverse kinematics method for a redundant robot manipulator with linear and nonlinear constraints," Robotics, vol. 9, no. 3, p. 61, 2020.
Prasetyawan, P., Ferdianto, Y., Ahdan, S. and Trisnawati, F., "Pengendali Lengan Robot Dengan Mikrokontroler Arduino Berbasis Smartphone," J. Tek. Elektro ITP, vol. 7, no. 2, pp. pp.104-109, 2018.
A. Ekayana, "Rancang Bangun Prototype Sistem Kendali Lengan Robot Pemindah Barang Menggunakan Interface Wireless 2.4 GHz," JST (Jurnal Sains dan Teknologi), vol. 6, no. 1, pp. pp 116 - 125, 2017.
Santoso, I., Adiwisastra, M.F., Simpony, B.K., Supriadi, D. and Purnia, D.S., "Impelementasi NodeMCU dalam Home Automation dengan Sistem Kontrol Apkikasi Blynk," Swabumi, vol. 9, no. 1, pp. 32-40, 2021.
Debauche, O., Mahmoudi, S., Marzak, A., Manneback, P. and Lebeau, F., "Smart nest box : IoT based nest monitoring in artificial cavities.," in In 2020 3rd International Conference on Advanced Communication Technologies and Networking (CommNet), 2020.
Feng, N., Hu, F., Wang, H. and Gouda, M.A., 2020., "Decoding of voluntary and involuntary upper-limb motor imagery based on graph fourier transform and cross-frequency coupling coefficients.," Journal of Neural Engineering, vol. 17, no. 5, p. p.056043, 2020.
DOI: http://dx.doi.org/10.30998/faktorexacta.v14i3.9807
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
